• Cadaver Cell 6 dirty / clean way
  • Cadaver Cell 6 dirty / clean way
  • Cadaver Cell 6 dirty / clean way
  • Cadaver Cell 6 dirty / clean way

  • 240 x 168 x 175 cm excluding refrigeration unit (WxDxH)
  • Durable polyester and stainless steel latches and hinges
  • 290 kg
  • Propane R-290 (CFC-free, halogen-free)
  • Stainless steel evaporator as standard, with durable TIG welds that prevent leakage
  • Fully wired, 230 V / 50 Hz (16A earthed plug)
  • Eight mini-containers of 240 litres or one Cadaver Bin of 950 litres

The Euratainer Cadaver Cell 6 is slightly wider, lower and shallower than the Cadaver Cell 1 (Top and Mono) and 2 and is suitable for large companies with a large waste flow. As well as 6 barrels or 8 containers, it can hold a 1100 litre rolling container or a 950 litre cadaver tray with 3 containers. We have developed the 950 litre cadaver trays in collaboration with Rendac and LTO, and they are completely certified and perfectly suited for above ground storage. This clean-dirty way unit has two doors at the rear and two doors at the front. This means there is minimal contact between the clean back (within the field of production) and the dirty front (where the contents are removed to be loaded for the rendering plant).

Cadaver Cells offer a good alternative to underground storage or cooling cellars. Storing above ground means that the same result can be achieved with a smaller investment. There is no need for excavation or other activities (placing wells, paving, digging, etc.) as the Cadaver Cell is placed directly in the desired location. Another advantage of this system is that the cadaver refrigeration (and the cadaver trays) can be placed directly in the vicinity of the shed.

Like all our models, this Euratainer comes complete with our RVS evaporator with TIG seam welds. Our RVS evaporators are produced by a special company in Italy that is specialised in these TIG seam welds. This welding method uses no ‘other raw materials’ such as tin or silver, which greatly reduces the chance of leakage. In short, the welded seams of our evaporators are also RVS, which therefore also significantly increases the lifespan of these units. 

The Cadaver Cell is simple and ergonomic to use and complies with Health & Safety regulations. This cadaver refrigeration unit has two doors at the front for unloading the barrels or containers. The doors can also be opened from the inside.

The automatic thermostat in the cooling unit means that the user does not have to worry about the temperature in the cadaver refrigerator. The thermostat ensures that the temperature is constantly held between 4 and 8 degrees. The Euratainer is easy to use. After delivery, simply plug it in and the rest is easy.

The outer casing is made of polyester with insulated walls (6 cm thick, with an insulation value of 0.323 W/m²K). The interior is completely seamless, which makes cleaning simple and means no waste residue can be left behind.